Specification
* Output: Continuous 12A, Burst 15A up to 10 Secs.
* Input Voltage: 2-4 cells lithium battery or 5-12 cells NiCd/NIMh battery.
* BEC: 1A / 5V (Linear mode).
* Max Speed:  210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM.
                     (BLM: BrushLess Motor)
* Size: 32mm (L) * 24mm (W) * 8mm (H)
* Weight: 12g

Features
* Safety Arming Feature:  Regardless the throttle stick position, the motor will not spin after battery connected.
* Throttle Calibration: Throttle range can be configured to provide best throttle linearity, fully compatible with all market available transmitters.
* Programmable Items:
     Brake Setting: brake enabled / brake disabled.
     Battery Type: Li-xx(Li-ion or LiPo) / Ni-xx(NiMh or NiCd).
     Low Voltage Protection Mode(Cutoff Mode): Gradually reduce the output power / Cutoff the output power.
     Low Voltage Cutoff Protection Threshold (Cutoff Threshold): low / medium / high.
     Start Mode: normal / soft / very soft.
     Timing: low / medium / high.
     Reset:  reset  all  the programmable items to their default settings.
* Full Protection Features: Low voltage cutoff protection / Over-heat protection / Throttle signal lost protection.

Advantages
* Military standard capacitor of extreme low resistance increases the ability of prevention of unwanted RF noise during flying.
* Extreme low resistance PCB is helpful for getting a super current endurance capability.
* Microprocessor uses separate voltage regulator IC, with good anti-jamming capability.
* Compatible with Hobbywing's Program Card

"SeaKing" series ESC is specially designed for boat, so it has the water-cooling system and the whole ESC is waterproof.

Specification
* Output: Continuous current 60A, burst current 120A.
* Input: 6-18 cells NiMH/NiCd or 2-6 cells LiPo.
* BEC Output: 6V@3A Switching mode built-in BEC.
* Suitable Motor: Sensorless Brushless Motor
* External diameter of the water cooling pipe: 5.0mm
* Size: 94mm(L) * 33mm(W) * 18mm(H).
* Weight: 76g

Features
* Use top quality electronic components to enhance the current endurance ability of the ESC.
* Special designed for RC boat, with excellent start-up, acceleration and linearity features.
* With water cooling system and the whole ESC is waterproof to get a longer life.
* With 2 running modes ("Forward" mode and "Forward/Backward" mode).
* Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection.
* With 8 steps of timing adjustment, compatible with all kinds of sensorless brushless motors.
* Swtching mode built-in BEC has a very powerful output even working with 6 cells lipo battery.
* User programmable and compatible with the pocket-sized Digital LED Program Card (Optional equipment) to set the ESC easily.

Programmable Items
The italics texts in the following form are the default settings.

"SeaKing" series ESC is specially designed for boat, so it has the water-cooling system and the whole ESC is waterproof.

Specification
* Output: Continuous current 35A, burst current 70A.
* Input: 5-9 cells NiMH or 2-3 cells LiPo.
* BEC Output: 6V@1.5A Linear mode built-in BEC.
* Suitable Motor: Sensorless Brushless Motor
* External diameter of the water cooling pipe: 4.0mm
* Size: 48mm(L) * 35mm(W) * 20mm(H).
* Weight: 50g

Features
* Use top quality electronic components to enhance the current endurance ability of the ESC.
* Special designed for RC boat, with excellent start-up, acceleration and throttle linearity features.
* With water cooling system.
* The whole ESC is waterproof.
* With 2 running modes ("Forward Only" mode and "Forward/Backward" mode).
* With 8 steps of timing adjustment to get the best compatibility with various of motors.
* Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection.
* User programmable and compatible with the pocket-sized Digital LED Program Card (Optional equipment) to set the ESC easily.

Programmable Items
The italics texts in the following form are the default settings.

"SeaKing" series ESC is specially designed for boat, so it has the water-cooling system and the whole ESC is waterproof.

Specification
* Output: Continuous current 25A, burst current 50A.
* Input: 5-9 cells NiMH or 2-3 cells LiPo.
* BEC Output: 6V@1.5A Linear mode built-in BEC.
* Suitable Motor: Sensorless Brushless Motor
* External diameter of the water cooling pipe: 4.0mm
* Size: 48mm(L) * 35mm(W) * 20mm(H).
* Weight: 48g

Features
* Use top quality electronic components to enhance the current endurance ability of the ESC.
* Special designed for RC boat, with excellent start-up, acceleration and linearity features.
* With water cooling system.
* The whole ESC is waterproof.
* 2 running modes ("Forward Only" mode and "Forward/Backward" mode).
* With 8 steps of timing adjustment to get the best compatibility with various of motors.
* Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection.
* User programmable and compatible with the pocket-sized Digital LED Program Card (Optional equipment) to set the ESC easily.

Programmable Items
The italics texts in the following form are the default settings.

Specification
* Output:  Continuous 60A, Burst 80A up to 10 Secs.
* Input Voltage:  2-6 cells lithium battery or 5-18 cells NiCd/NIMh battery.   
* BEC:  3A/5A(Switch Mode).
* Max Speed:  210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM.
                               (BLM: BrushLess Motor)
* Size:  70mm (L) * 31mm (W) * 14mm (H).
* Weight: 56g.

Features
* Safety Arming Feature:  Regardless the throttle stick position, the motor will not spin after battery connected.
* Throttle Calibration: Throttle range can be configured to provide best throttle linearity, fully compatible with all market available transmitters.
* Programmable Items:
     Brake Setting: brake enabled / brake disabled.
     Battery Type: Li-xx(Li-ion or LiPo) / Ni-xx(NiMh or NiCd).
     Low Voltage Protection Mode(Cutoff Mode): Gradually reduce the output power / Cutoff the output power.
     Low Voltage Cutoff Protection Threshold (Cutoff Threshold): low / medium / high.
     Start Mode: normal / soft / very soft.
     Timing: low / medium / high.
     Reset:  reset  all  the programmable items to their default settings.
* Full Protection Features: Low voltage cutoff protection / Over-heat protection / Throttle signal lost protection.

Advantages
* Military standard capacitor of extreme low resistance increases the ability of prevention of unwanted RF noise during flying.
* Extreme low resistance PCB is used at the power output section, the whole ESC has super current endurance capability.
* Microprocessor uses separate voltage regulator IC, with good anti-jamming capability.
* Compatible with Hobbywing's Program Card. 

Specification
* Output:  Continuous 40A, Burst 60A up to 10 Secs.
* Input Voltage:  2-6 cells lithium battery or 5-18 cells NiCd/NIMh battery.   
* BEC:  3A/5A(Switch Mode).
* Max Speed:  210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM.
                               (BLM: BrushLess Motor)
* Size:  55mm (L) * 28mm (W) * 12mm (H).
* Weight: 32g
Note: The old version Pentium-40A uses built-in linear mode BEC, but the new version uses switch mode BEC to enhance the output ability.

Features
* Safety Arming Feature:  Regardless the throttle stick position, the motor will not spin after battery connected.
* Throttle Calibration: Throttle range can be configured to provide best throttle linearity, fully compatible with all market available transmitters.
* Programmable Items:
     Brake Setting: brake enabled / brake disabled.
     Battery Type: Li-xx(Li-ion or LiPo) / Ni-xx(NiMh or NiCd).
     Low Voltage Protection Mode(Cutoff Mode): Gradually reduce the output power / Cutoff the output power.
     Low Voltage Cutoff Protection Threshold (Cutoff Threshold): low / medium / high.
     Start Mode: normal / soft / very soft.
     Timing: low / medium / high.
     Reset:  reset  all  the programmable items to their default settings.
* Full Protection Features: Low voltage cutoff protection / Over-heat protection / Throttle signal lost protection.

Advantages
* Military standard capacitor of extreme low resistance increases the ability of prevention of unwanted RF noise during flying.
* Extreme low resistance PCB is used at the power output section, the whole ESC has super current endurance capability.
* Microprocessor uses separate voltage regulator IC, with good anti-jamming capability.
* Compatible with Hobbywing's Program Card. 

Specification
* Output: Continuous 80A, Burst 100A up to 10 Secs.
* Input Voltage: 2-6 cells lithium battery or 5-18 cells NiCd/NIMh battery.
* BEC: 3A / 5V (Switch mode).
* Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM.
(BLM: BrushLess Motor)
* Size: 70mm (L) * 31mm (W) * 14mm (H).
* Weight: 62g.

Features
* Safety Arming Feature: Regardless the throttle stick position, the motor will not spin after battery connected.
* Throttle Calibration: Throttle range can be configured to provide best throttle linearity, fully compatible with all market available transmitters.* Programmable Items:
Brake Setting: brake enabled / brake disabled.
Battery Type: Li-xx(Li-ion or LiPo) / Ni-xx(NiMh or NiCd).
Low Voltage Protection Mode(Cutoff Mode): Gradually reduce the output power / Cutoff the output power.
Low Voltage Cutoff Protection Threshold (Cutoff Threshold): low / medium / high.
Start Mode: normal / soft / very soft.
Timing: low / medium / high.
Reset: reset all the programmable items to their default settings.
* Full Protection Features: Low voltage cutoff protection / Over-heat protection / Throttle signal lost protection.

Advantages
* Military standard capacitor of extreme low resistance increases the ability of prevention of unwanted RF noise during flying.
* Extreme low resistance PCB is used at the power output section, the whole ESC has super current endurance capability.
* Microprocessor uses separate voltage regulator IC, with good anti-jamming capability.
* Compatible with Hobbywing's Program Card.

1 Specification
* Output: Continuous 30A, Burst 40A up to 10 Secs.
* Input Voltage: 2-4 cells lithium battery or 5-12 cells NiCd/NIMh battery.
* BEC: 2A / 5V (Linear mode).
* Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM.
(BLM: BrushLess Motor)
* Size: 45mm (L) * 24mm (W) * 11mm (H).
* Weight: 25g

Features
* Safety Arming Feature: Regardless the throttle stick position, the motor will not spin after battery connected.
* Throttle Calibration: Throttle range can be configured to provide best throttle linearity, fully compatible with all market available transmitters.
* Programmable Items:
Brake Setting: brake enabled / brake disabled.
Battery Type: Li-xx(Li-ion or LiPo) / Ni-xx(NiMh or NiCd).
Low Voltage Protection Mode(Cutoff Mode): Gradually reduce the output power / Cutoff the output power.
Low Voltage Cutoff Protection Threshold (Cutoff Threshold): low / medium / high.
Start Mode: normal / soft / very soft.
Timing: low / medium / high.
Reset: reset all the programmable items to their default settings.
* Full Protection Features: Low voltage cutoff protection / Over-heat protection / Throttle signal lost protection.

Advantages
3.1 Military standard capacitor of extreme low resistance increases the ability of prevention of unwanted RF noise during flying.
3.2 Extreme low resistance PCB is helpful for getting a super current endurance capability.
3.3 Microprocessor uses separate voltage regulator IC, with good anti-jamming capability.
3.4 Compatible with Hobbywing's Program Card

Specification
* Output: Continuous 100A, Burst 120A up to 10 Secs.
* Input Voltage: 2-12 cells lithium battery or 5-36 cells NiCd/NIMH battery.
* BEC: None.
* Control Signal Transmission: Optical
* Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM.
(BLM: BrushLess Motor)
* Size: 78mm (L) * 55mm (W) * 15mm (H).
* Weight: 112g.

Features
* Safety Arming Feature: Regardless the throttle stick position, the motor will not spin after battery connected.
* Throttle Calibration: Throttle range can be configured to provide best throttle linearity, fully compatible with all market available transmitters.
* Programmable Items:
Brake Setting: brake enabled / brake disabled.
Battery Type: Li-xx (Li-ion or LiPo) / Ni-xx (NiMH or NiCd).
Low Voltage Protection Mode(Cutoff Mode): Gradually reduce the output power / Cutoff the output power.
Low Voltage Cutoff Protection Threshold (Cutoff Threshold): low / medium / high.
Start Mode: normal / soft / very soft.
Timing: low / medium / high.
Lipo Battery Cells: Auto calculate / Set the cells number manually.
Reset: reset all the programmable items to its default setting.
* Full Protection Features: Low voltage cutoff protection / Over-heat protection / Throttle signal lost protection.

Advantages
* Military standard capacitor of extreme low resistance increases the ability of prevention of unwanted RF noise during flying.
* Extreme low resistance PCB is used at the power output section, the whole ESC has super current endurance capability.
* Microprocessor uses separate voltage regulator IC, with good anti-jamming capability.
* Compatible with Hobbywing's Program Card.

The 5A-HV-UBEC is a switch-mode DC-DC regulator supplied with a 3-10 cells lithium battery pack and outputs a consistent safe power for your receiver, gyro and servos. It is very suitable for big electric RC models. Using this UBEC, the receiver can obtain the power supply directly from the main battery pack, so the additional battery pack for receiver is unnecessary.
Compared with the linear mode UBEC, the overall efficiency of the switch-mode UBEC is much higher, so it can extend the working time of the receiver battery pack, and because a switch mode UBEC can significantly reduce the heat emission, it can avoid the loss of control caused by the over-heat problem which is frequently happened with the linear mode UBEC.

Specification
* Output Voltage: 5V or 6V (Changeable with an output-voltage select jumper )
* Continuous output current: 5 Amps
* Burst output current: 7.5 Amps
* Input: 8V-42V (3-10 cells lithium battery pack)
* Quiescent current: 20mA
* Size: 48mm*27mm*9mm (L*W*H)
* Weight: 30g

Features
* Designed with an advanced switch mode DC-DC regulator IC, the max efficiency of the chip is up to 92%.
* The output current is very large.
* With the output short-circuit protection function.
* A metal shield covers almost all the electronic components, and a filter is attached with the output wires to significantly reduce the electromagnetic interference.
* With ultra-wide input voltage from 8V-42V.
* Safe power on with the polarity protection function. If the input polarity is not correct, the UBEC can't work, but it will not be damaged. What you need to do is just swapping the battery pack's polarity.
* Shows the working status with an indicator (LED), lights when the output is in normal range.
* It has a switch to turn on or turn off the output.
* With a step-down voltage regulator of 0.7V down as an accessory (From 6.0V to 5.3V).

Specification
* Output: Continuous 10A, Burst 12A up to 10 Secs.
* Input Voltage: 2-4 cells lithium battery or 5-12 cells NiCd/NIMh battery.
* BEC: 1A / 5V (Linear mode).
* Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM.
(BLM: BrushLess Motor)
1.5 Size: 27mm (L) * 17mm (W) * 6mm (H).
1.6 Weight: 9g.

Features
* Safety Arming Feature: Regardless the throttle stick position, the motor will not spin after battery connected.
* Throttle Calibration: Throttle range can be configured to provide best throttle linearity, fully compatible with all market available transmitters.
* Programmable Items:
Brake Setting: brake enabled / brake disabled.
Battery Type: Li-xx(Li-ion or LiPo) / Ni-xx(NiMh or NiCd).
Low Voltage Protection Mode(Cutoff Mode): Gradually reduce the output power / Cutoff the output power.
Low Voltage Cutoff Protection Threshold (Cutoff Threshold): low / medium / high.
Start Mode: normal / soft / very soft.
Timing: low / medium / high.
Reset: reset all the programmable items to their default settings.
* Full Protection Features: Low voltage cutoff protection / Over-heat protection / Throttle signal lost protection.

Advantages
* Military standard capacitor of extreme low resistance increases the ability of prevention of unwanted RF noise during flying.
* Extreme low resistance PCB is helpful for getting a super current endurance capability.
* Microprocessor uses separate voltage regulator IC, with good anti-jamming capability.
* Compatible with Hobbywing's Program Card

Specification
* Output: Continuous 18A, Burst 22A up to 10 Secs.
* Input Voltage: 2-4 cells lithium battery or 5-12 cells NiCd/NIMh battery.
* BEC: 2A / 5V (Linear mode).
* Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM.
(BLM: BrushLess Motor)
* Size: 45mm (L) * 24mm (W) * 11mm (H).
* Weight: 19g.

Features
* Safety Arming Feature: Regardless the throttle stick position, the motor will not spin after battery connected.
* Throttle Calibration: Throttle range can be configured to provide best throttle linearity, fully compatible with all market available transmitters.
* Programmable Items:
Brake Setting: brake enabled / brake disabled.
Battery Type: Li-xx(Li-ion or LiPo) / Ni-xx(NiMh or NiCd).
Low Voltage Protection Mode(Cutoff Mode): Gradually reduce the output power / Cutoff the output power.
Low Voltage Cutoff Protection Threshold (Cutoff Threshold): low / medium / high.
Start Mode: normal / soft / very soft.
Timing: low / medium / high.
Reset: reset all the programmable items to their default settings.
* Full Protection Features: Low voltage cutoff protection / Over-heat protection / Throttle signal lost protection.

Advantages
3.1 Military standard capacitor of extreme low resistance increases the ability of prevention of unwanted RF noise during flying.
3.2 Extreme low resistance PCB is helpful for getting a super current endurance capability.
3.3 Microprocessor uses separate voltage regulator IC, with good anti-jamming capability.
3.4 Compatible with Hobbywing's Program Card

Specification
* Output: Continuous 25A, Burst 35A up to 10 Secs.
* Input Voltage: 2-4 cells lithium battery or 5-12 cells NiCd/NIMh battery.
* BEC: 2A / 5V (Linear mode).
* Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM.
(BLM: BrushLess Motor)
* Size: 45mm (L) * 24mm (W) * 11mm (H).
* Weight: 22g.

Features
* Safety Arming Feature: Regardless the throttle stick position, the motor will not spin after battery connected.
* Throttle Calibration: Throttle range can be configured to provide best throttle linearity, fully compatible with all market available transmitters.
* Programmable Items:
Brake Setting: brake enabled / brake disabled.
Battery Type: Li-xx(Li-ion or LiPo) / Ni-xx(NiMh or NiCd).
Low Voltage Protection Mode(Cutoff Mode): Gradually reduce the output power / Cutoff the output power.
Low Voltage Cutoff Protection Threshold (Cutoff Threshold): low / medium / high.
Start Mode: normal / soft / very soft.
Timing: low / medium / high.
Reset: reset all the programmable items to their default settings.
* Full Protection Features: Low voltage cutoff protection / Over-heat protection / Throttle signal lost protection.

Advantages
3.1 Military standard capacitor of extreme low resistance increases the ability of prevention of unwanted RF noise during flying.
3.2 Extreme low resistance PCB is helpful for getting a super current endurance capability.
3.3 Microprocessor uses separate voltage regulator IC, with good anti-jamming capability.
3.4 Compatible with Hobbywing's Program Card

Specification
* Output: Continuous current 18A, burst current 50A.
* Input: 4-9 cells NiMH/NiCd or 2-3 cells LiPo.
* BEC Output: 6V/1A.
* Resistance: 0.01 Ohm.
* Motor Supported: Sensorless Brushless Motor
* Suitable Brushless Motor:
With 4-6 cells NiMH/NiCd or 2 cells Lipo: On-Road≥12T, Off-Road≥18T;
With 6-9 cells NiMH/NiCd or 3 cells Lipo: On-Road≥18T, Off-Road≥24T;
* Suitable Car: 1/18 on-road or off-road cars / trucks for normal race or sportful race.
* Size: 31.5mm(L) * 24mm(W) * 15mm(H).
* Weight: 19g(Without wires)

Features
* Compatible with all sonsorless brushless motor.
* Use top quality electronic components to enhance the current endurance ability of the ESC.
* Excellent start-up, acceleration and linearity features.
* With 3 running modes: Racing mode (Forward), Forward/Backward mode and Rock Crawler mode.
* With 4 steps of maximum reverse force adjustment.
* Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
* With 9 start modes (Also called "Punch" ) from "Soft" to "Very aggressive" to suitable for different tracks.
* Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
* With 8 steps of timing adjustment to get the best compatibility with various of motors.
* Easily program with only one button and compatible with pocket-sized program card.
* The ESC is USB supported. The firmware of the ESC can be updated through an USB adapter on the Advanced LCD Program Box (Optional device).

Specification
* Output: Continuous current 25A, burst current 90A.
* Input: 4-9 cells NiMH/NiCd or 2-3 cells LiPo.
* BEC Output: 6V/1.5A.
* Resistance: 0.005 Ohm.
* Motor Supported: Sensorless Brushless Motor
* Suitable Brushless Motor:
With 4-6 cells NiMH/NiCd or 2 cells Lipo: On-Road≥12T, Off-Road≥18T;
With 6-9 cells NiMH/NiCd or 3 cells Lipo: On-Road≥18T, Off-Road≥24T;
* Suitable Car: 1/16, 1/18 on-road or off-road cars / trucks for normal race or sportful race.
* Size: 31.5mm(L) * 27.5mm(W) * 16mm(H).
* Weight: 23g(Without wires)

Features
* Compatible with all sonsorless brushless motor.
* Use top quality electronic components to enhance the current endurance ability of the ESC.
* Excellent start-up, acceleration and linearity features.
* With 3 running modes: Racing mode (Forward), Forward/Backward mode and Rock Crawler mode.
* With 4 steps of maximum reverse force adjustment.
* Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
* With 9 start modes (Also called "Punch" ) from "Soft" to "Very aggressive" to suitable for different tracks.
* Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
* With 8 steps of timing adjustment to get the best compatibility with various of motors.
* Easily program with only one button and compatible with pocket-sized program card.
* The ESC is USB supported. The firmware of the ESC can be updated through an USB adapter on the Advanced LCD Program Box (Optional device).

Specification
* Output: Continuous current 25A, burst current 90A.
* Input: 4-9 cells NiMH/NiCd or 2-3 cells LiPo.
* BEC Output: 6V/1.5A.
* Resistance: 0.005 Ohm.
* Motor Supported: Sensorless Brushless Motor
* Suitable Brushless Motor:
With 4-6 cells NiMH/NiCd or 2 cells Lipo: On-Road≥12T;
With 6-9 cells NiMH/NiCd or 3 cells Lipo: On-Road≥18T;
* Suitable Car: RTR application for 1/12, 1/10 on-road cars
* Size: 31.5mm(L) * 27.5mm(W) * 24mm(H).
* Weight: 30g(Without wires)

Features
* Compatible with all sonsorless brushless motor.
* Use top quality electronic components to enhance the current endurance ability of the ESC.
* Excellent start-up, acceleration and linearity features.
* With 3 running modes: Racing mode (Forward), Forward/Backward mode and Rock Crawler mode.
* With 4 steps of maximum reverse force adjustment.
* Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
* With 9 start modes (Also called "Punch" ) from "Soft" to "Very aggressive" to suitable for different tracks.
* Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
* With 8 steps of timing adjustment to get the best compatibility with various of motors.
* Easily program with only one button and compatible with pocket-sized program card.

Specification
* Output: Continuous current 35A, burst current 190A.
* Input: 4-9 cells NiMH/NiCd or 2-3 cells LiPo.
* BEC Output: 6V/1.5A.
* Resistance: 0.0015 Ohm.
* Motor Supported: Sensorless Brushless Motor
* Suitable Brushless Motor:
With 4-6 cells NiMH/NiCd or 2 cells Lipo: On-Road≥9T, Off-Road≥12T;
With 6-9 cells NiMH/NiCd or 3 cells Lipo: On-Road≥12T, Off-Road≥18T;
* Suitable Car: 1/12, 1/10 on-road or off-road cars / trucks for normal race or sportful race.
* Size: 31.5mm(L) * 27.5mm(W) * 24mm(H).
* Weight: 30g(Without wires)

Features
* Compatible with all sonsorless brushless motor.
* Use top quality electronic components to enhance the current endurance ability of the ESC.
* Excellent start-up, acceleration and linearity features.
* With 3 running modes: Racing mode (Forward), Forward/Backward mode and Rock Crawler mode.
* With 4 steps of maximum reverse force adjustment.
* Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
* With 9 start modes (Also called "Punch" ) from "Soft" to "Very aggressive" to suitable for different tracks.
* Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
* With 8 steps of timing adjustment to get the best compatibility with various of motors.
* Easily program with only one button and compatible with pocket-sized program card.
* The ESC is USB supported. The firmware of the ESC can be updated through an USB adapter on the Advanced LCD Program Box (Optional device).

Specification
* Output: Continuous current 60A, burst current 380A.
* Input: 4-9 cells NiMH/NiCd or 2-3 cells LiPo.
* BEC Output: 6V/1.5A.
* Resistance: 0.0007 Ohm.
* Motor Supported: Sensorless Brushless Motor
* Suitable Brushless Motor:
With 4-6 cells NiMH/NiCd or 2 cells Lipo: On-Road≥5.5T, Off-Road≥8.5T;
With 6-9 cells NiMH/NiCd or 3 cells Lipo: On-Road≥8.5T, Off-Road≥13T;
* Suitable Car: 1/12, 1/10 on-road or off-road cars / trucks for normal race or sportful race.
* Size: 31.5mm(L) * 27.5mm(W) * 24mm(H).
* Weight: 32g(Without wires)

Features
* Compatible with all sonsorless brushless motor.
* Use top quality electronic components to enhance the current endurance ability of the ESC.
* Excellent start-up, acceleration and linearity features.
* With 3 running modes: Racing mode (Forward), Forward/Backward mode and Rock Crawler mode.
* With 4 steps of maximum reverse force adjustment.
* Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
* With 9 start modes (Also called "Punch" ) from "Soft" to "Very aggressive" to suitable for different tracks.
* Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
* With 8 steps of timing adjustment to get the best compatibility with various of motors.
* Easily program with only one button and compatible with pocket-sized program card.
* The ESC is USB supported. The firmware of the ESC can be updated through an USB adapter on the Advanced LCD Program Box (Optional device).

Description:
* Speed Controller (ESC): EZRUN-80A-SD
* Motor: EZRUN-3674SL 1pcs.
* The motor heat sink and the cooling fan are included.
* Motor Pinion: 1pcs.
* Program Card: 1pcs.
* Other Accessories: Double-side gummy tape, Screws for fixing the ESC, Heat-shrink tubings, Logo labels, etc.

ESC Specification:
* Output: Continuous current 80A, burst current 270A.
* Input: 6-12 cells NiMH/NiCd or 2-4 cells LiPo.
* BEC Output: 5.75V/3A (Switch mode built-in BEC).
* Resistance: 0.0018 Ohm.
* Motor Supported: Sensorless and sensored brushless motors
* Suitable Brushless Motor: 8T and > 8T
* Suitable Car: 1/8 on-road or off-road cars / trucks for sportful race and RTR application.
* Size: 68mm(L) * 55mm(W) * 45mm(H).
* Weight: 150g(Without wires)

Features:
* Compatible with all sensorless brushless motors and most of sensored brushless motors such as Novak, LRP and Feigao, etc.
* Excellent start-up, acceleration and linearity features.
* 3 running modes (Forward only with brake, Forward/Reverse with brake, Forward/Reverse immediately)
* 4 steps of maximum reverse force adjustment.
* Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
* 9 start modes (Also called “Punch”) from “very soft (Level 1)” to “very aggressive (Level 9)”.
* Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
* 8 steps of timing adjustment by software.
* Built-in switch mode BEC has a powerful output to supply all the electronic equipments.
* Easily program with only one button and compatible with pocket-sized Program Card.
* Firmware can be updated through an USB adapter (Optional equipment).
* Splash proof and dustproof.

Typical Applications.
* Super powerful for 500 class helicopter
* Very powerful for 550 class helicopter
* Very powerful for large scale aircraft

Specification
* Output: Continuous 80A, burst 120A up to 10 seconds.
* Input Voltage: 2-6 cells lithium battery or 5-18 cells NIMH battery.
* BEC: Switching mode DC-DC regulator. 3A@5.25V or 3A@6V switchable by user progromming.
* Control Signal Transmission: Optically coupled system.
* Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM.
(BLM: BrushLess Motor)
* Size: 70mm (L) * 34mm (W) * 16mm (H).
* Weight: 77g.

Features
* High performance microprocessor brings out the best compatibility with all kinds of motors and the highest driving efficiency.
* Wide-open heat-sink design to get the best heat dissipation effect.
* With 3 types of start mode: Normal / Soft / Very-Soft, compatible with aircraft and helicopter.
* Smooth, linear, quick and precise throttle response.
* The output voltage of the built-in BEC is switchable by user programming (5.25V or 6.0V).
* Multiple protection features: Low-voltage cut-off protection / Over-heat protection / Throttle signal loss protection
* Perfect governor mode for helicopter.
* The firmware of the ESC can be updated through the USB adapter on the Professional LCD Program Box.
* User programmable. Several kinds of program methods are supported: transmitter, digital LED program card, advanced professional LCD program box, PC software. Very easy to program the ESC at home or at the flying field.

Typical Applications.
* Super powerful for 600 class helicopter (Working with 8 or 10 cells Lipo battery)
* Very powerful for 700 class helicopter (Working with 10 or 12 cells Lipo battery)
* Super powerful for large scale aircraft such as F3A

Specification
* Output: Continuous 120A, burst 180A up to 10 seconds.
* Input Voltage: 5-12 cells lithium battery or 15-36 cells NIMH battery.
* BEC: None.
* Control Signal Transmission: Optically coupled system.
* Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM.
(BLM: BrushLess Motor)
* Size: 88mm (L) * 55mm (W) * 15mm (H).
* Weight: 125g.

Features
* High performance microprocessor brings out the best compatibility with all kinds of motors and the highest driving efficiency.
* Wide-open heat-sink design to get the best heat dissipation effect.
* With 3 types of start mode: Normal / Soft / Very-Soft, compatible with aircraft and helicopter.
* Smooth, linear, quick and precise throttle response.
* Multiple protection features: Low-voltage cut-off protection / Over-heat protection / Throttle signal loss protection.
* The throttle signal is transfered through optically coupled system to avoid the electromagnetic interference.
* Perfect governor mode for helicopter.
* The firmware of the ESC can be updated through the USB adapter on the Professional LCD Program Box.
* User programmable. Several kinds of program methods are supported: transmitter, digital LED program card, advanced professional LCD program box, PC software. Very easy to program the ESC at home or at the flying field.

1 Typical Applications
* Super powerful for 450 and 400 class helicopter
* Very powerful for middle scale aircraft

2 Specification
* Output: Continuous 40A, burst 60A up to 10 seconds.
* Input Voltage: 2-6 cells lithium battery or 5-18 cells NIMH battery.
* BEC: Switching mode DC-DC regulator. 3A@5.25V or 3A@6V switchable by user progromming.
* Control Signal Transmission: Optically coupled system.
* Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM.
(BLM: BrushLess Motor)
* Size: 59mm (L) * 27mm (W) * 12mm (H).
* Weight: 38g.

3 Features
* High performance microprocessor brings out the best compatibility with all kinds of motors and the highest driving efficiency.
* Wide-open heat-sink design to get the best heat dissipation effect.
* With 3 types of start mode: Normal / Soft / Very-Soft, compatible with aircraft and helicopter.
* Smooth, linear, quick and precise throttle response.
* The output voltage of the built-in BEC is switchable by user programming (5.25V or 6.0V).
* Multiple protection features: Low-voltage cut-off protection / Over-heat protection / Throttle signal loss protection
* Perfect governor mode for helicopter.
* The firmware of the ESC can be updated through the USB adapter on the Professional LCD Program Box.
* User programmable. Several kinds of program methods are supported: transmitter, digital LED program card, advanced professional LCD program box, PC software. Very easy to program the ESC at home or at the flying field

Typical Applications
* Super powerful for 450 class helicopter
* Very powerful for 500 class helicopter
* Very powerful for middle scale aircraft

Specification
* Output: Continuous 60A, burst 90A up to 10 seconds.
* Input Voltage: 2-6 cells lithium battery or 5-18 cells NIMH battery.
* BEC: Switching mode DC-DC regulator. 3A@5.25V or 3A@6V switchable by user progromming.
* Control Signal Transmission: Optically coupled system.
* Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM.
(BLM: BrushLess Motor)
* Size: 70mm (L) * 34mm (W) * 16mm (H).
* Weight: 68g.

Features
* High performance microprocessor brings out the best compatibility with all kinds of motors and the highest driving efficiency.
* Wide-open heat-sink design to get the best heat dissipation effect.
* With 3 types of start mode: Normal / Soft / Very-Soft, compatible with aircraft and helicopter.
* Smooth, linear, quick and precise throttle response.
* The output voltage of the built-in BEC is switchable by user programming (5.25V or 6.0V).
* Multiple protection features: Low-voltage cut-off protection / Over-heat protection / Throttle signal loss protection
* Perfect governor mode for helicopter.
* The firmware of the ESC can be updated through the USB adapter on the Professional LCD Program Box.
* User programmable. Several kinds of program methods are supported: transmitter, digital LED program card, advanced professional LCD program box, PC software. Very easy to program the ESC at home or at the flying field.

Typical Applications.
* Super powerful for 600 class helicopter (Working with 6 cells Lipo battery)
* Very powerful for 700 class helicopter (Working with 6 cells Lipo battery)
* Super powerful for large scale aircraft such as F3A (Working with 6 cells Lipo battery)

Specification
* Output: Continuous 150A, burst 220A up to 10 seconds.
* Input Voltage: 2-6 cells lithium battery or 5-18 cells NIMH battery.
* BEC: None.
* Control Signal Transmission: Optically coupled system.
* Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM.
(BLM: BrushLess Motor)
* Size: 88mm (L) * 55mm (W) * 15mm (H).
* Weight: 125g.

Features
* High performance microprocessor brings out the best compatibility with all kinds of motors and the highest driving efficiency.
* Wide-open heat-sink design to get the best heat dissipation effect.
* With 3 types of start mode: Normal / Soft / Very-Soft, compatible with aircraft and helicopter.
* Smooth, linear, quick and precise throttle response.
* The throttle signal is transfered through optically coupled system to avoid the electromagnetic interference.
* Multiple protection features: Low-voltage cut-off protection / Over-heat protection / Throttle signal loss protection
* Perfect governor mode for helicopter.
* The firmware of the ESC can be updated through the USB adapter on the Professional LCD Program Box.
* User programmable. Several kinds of program methods are supported: transmitter, digital LED program card, advanced professional LCD program box, PC software. Very easy to program the ESC at home or at the flying field.

Typical Applications.
* Super powerful for 550 class helicopter
* Very powerful for 600 class helicopter
* Very powerful for large scale aircraft

Specification
* Output: Continuous 100A, burst 150A up to 10 seconds.
* Input Voltage: 2-6 cells lithium battery or 5-18 cells NIMH battery.
* BEC: Switching mode DC-DC regulator. 3A@5.25V or 3A@6V switchable by user progromming.
* Control Signal Transmission: Optically coupled system.
* Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM.
(BLM: BrushLess Motor)
* Size: 70mm (L) * 34mm (W) * 16mm (H).
* Weight: 82g.

Features
* High performance microprocessor brings out the best compatibility with all kinds of motors and the highest driving efficiency.
* Wide-open heat-sink design to get the best heat dissipation effect.
* With 3 types of start mode: Normal / Soft / Very-Soft, compatible with aircraft and helicopter.
* Smooth, linear, quick and precise throttle response.
* The output voltage of the built-in BEC is switchable by user programming (5.25V or 6.0V).
* Multiple protection features: Low-voltage cut-off protection / Over-heat protection / Throttle signal loss protection
* Perfect governor mode for helicopter.
* The firmware of the ESC can be updated through the USB adapter on the Professional LCD Program Box.
* User programmable. Several kinds of program methods are supported: transmitter, digital LED program card, advanced professional LCD program box, PC software. Very easy to program the ESC at home or at the flying field.

Specification
* Output: Continuous 6A, Burst 8A up to 10 Secs.
* Input Voltage: 2 cells lithium battery or 5-6 cells NiCd/NIMh battery.
* BEC: 0.8A / 5V (Linear mode).
* Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM.
(BLM: BrushLess Motor)
* Size: 24mm (L) * 12mm (W) * 6mm (H).
* Weight: 6g.
Features
* Safety Arming Feature: Regardless the throttle stick position, the motor will not spin after battery connected.
* Throttle Calibration: Throttle range can be configured to provide best throttle linearity, fully compatible with all market available transmitters.
* Programmable Items:
Brake Setting: brake enabled / brake disabled.
Battery Type: Li-xx(Li-ion or LiPo) / Ni-xx(NiMh or NiCd).
Low Voltage Protection Mode(Cutoff Mode): Gradually reduce the output power / Cutoff the output power.
Low Voltage Cutoff Protection Threshold (Cutoff Threshold): low / medium / high.
Start Mode: normal / soft / very soft.
Timing: low / medium / high.
Reset: reset all the programmable items to their default settings.
* Full Protection Features: Low voltage cutoff protection / Over-heat protection / Throttle signal lost protection.

Advantages
* Military standard capacitor of extreme low resistance increases the ability of prevention of unwanted RF noise during flying.
* Extreme low resistance PCB is helpful for getting a super current endurance capability.
* Microprocessor uses separate voltage regulator IC, with good anti-jamming capability.
* Compatible with Hobbywing's Program Card